#Go to openmrs modules path on Bahmni server
sudo cd /opt/openmrs/modules

# Stop openmrs service
sudo service openmrs stop

# Take a backup of existing webservice.rest module (Eg for Bahmni v0.91)
sudo mv webservices.rest-2.20.0.omod webservices.rest-2.20.0.omod.backup
 
# Download webservices.rest-2.24.0.omod using below command 
sudo wget https://dl.bintray.com/openmrs/omod/webservices.rest-2.24.0.omod

# Give ownership to bahmni user
sudo chown bahmni:bahmni webservices.rest-2.24.0.omod
 
# Start Openmrs service 
sudo service openmrs start

Please note, for Bahmni version 0.91 and earlier, we are no longer supporting Bahmni installation on CentOS 6.8 as centos has deprecated this version. You should have to choose either CentOS 6.7 or CentOS 6.9 for Bahmni installation. 

For production purposes, CentOS 7.6 64bit is the recommended & tested platform for running Bahmni version 0.92 and above. CentOS 7.5 is fine as well.

The below mentioned process is based off installing RPMs. Depending on which Bahmni package you wish to install, you can choose to install the appropriate RPM. Each RPM now contains its embedded tomcat or web server, and becomes its own service, which can be started or stopped.

List of RPMs:

• bahmni-emr (Bahmni Backend)
• bahmni-web (Bahmni EMR UI)
• bahmni-reports (Bahmni Reports)
• bahmni-lab (OpenELIS)
• bahmni-erp (OpenERP / Odoo package)
• bahmni-event-log-service (separate web app to sync events created on Bahmni)
• pacs-integration (webapp to send radiology orders to PACS/Modality)
• dcm4chee (open-source PACS)

If you want to install Bahmni for Development on your laptop (Windows, Mac or Linux), then you can choose to instead install the Bahmni Virtual Box.

You can also watch the installation steps on this youtube video: Install Bahmni - Step by Step

If you don't have a CentOS box, or have a slow internet, you can perform these steps on a Cloud based CentOS, for instance on Digital Ocean. Please refer to this Wiki document on Deploying Bahmni on the Cloud.

Bahmni v0.91 or earlier, does not work on CentOS v7.x, you need to choose either CentOS 6.7 or CentOS 6.9 for Bahmni v0.91 installation. 

You have two options to install Bahmni. One is the latest v0.92 (or v0.91) version of Bahmni. Both the versions uses command line called "bahmni" which can be used to install and configure Bahmni. v0.92 is the recommended version. Alternatively, you can install v0.91 version of Bahmni which is the previous released version. Both options are documented below.

Please refer to this document to read about the latest stable releases: ALL Bahmni Releases

#Prerequisite for the fresh installation of Bahmni
yum install -y https://kojipkgs.fedoraproject.org//packages/zlib/1.2.11/19.fc30/x86_64/zlib-1.2.11-19.fc30.x86_64.rpm


# Install the bahmni command line program (Choose the version you want). 
yum install https://dl.bintray.com/bahmni/rpm/rpms/bahmni-installer-0.92-147.noarch.rpm

# Confirm that the bahmni command is correctly installed (you should see a help message for the command)
bahmni --help
 
# Now setup a configuration file for bahmni command in /etc/bahmni-installer. 
curl -L https://tinyurl.com/yyoj98df >> /etc/bahmni-installer/setup.yml
 
# Confirm the contents of the file. It should look like this file: (https://goo.gl/R8ekg5)
cat /etc/bahmni-installer/setup.yml

# The above setup.yml, has a timezone entry. You can change it to suit your timezone if you like. For valid options
# please read this document: https://bahmni.atlassian.net/wiki/display/BAH/List+Of+Configurable+Installation+Variables

# Set the inventory file name to local in BAHMNI_INVENTORY environment variable. This way you won't need to use the '-i local' switch every time you use the 'bahmni' command
#You can also configure custom inventory file instead of local.
echo "export BAHMNI_INVENTORY=local" >> ~/.bashrc
source ~/.bashrc
 
# Now fire the installer
bahmni install 
 
# The installation should be done in about 15 - 30 minutes depending on your internet speed. 
# Verify installed components using the command:
yum list installed | grep bahmni

#Prerequisite for the fresh installation of Bahmni
yum upgrade python-setuptools

# Prerequisite Click 7.0 for fresh installation of Bahmni
# Download Click 7.0 to /home/bahmni
wget https://files.pythonhosted.org/packages/f8/5c/f60e9d8a1e77005f664b76ff8aeaee5bc05d0a91798afd7f53fc998dbc47/Click-7.0.tar.gz -P /home/bahmni
# Extract tar file
cd /home/bahmni
tar -xvf Click-7.0.tar.gz
# Install Click 7.0
cd Click-7.0
python setup.py install

# Install the bahmni command line program (Choose the version you want). 
yum install https://dl.bintray.com/bahmni/rpm/rpms/bahmni-installer-0.91-89.noarch.rpm  #version 0.91

# Confirm that the bahmni command is correctly installed (you should see a help message for the command)
bahmni --help
 
# Now setup a configuration file for bahmni command in /etc/bahmni-installer. 
curl -L https://goo.gl/R8ekg5 >> /etc/bahmni-installer/setup.yml
 
# Confirm the contents of the file. It should look like this file: (https://goo.gl/R8ekg5)
cat /etc/bahmni-installer/setup.yml

# Run below command to add mx_download_url to setup.yml file
printf "\nmx_download_url: https://dl.bintray.com/bahmni/rpm/mx-1.4.5-1-mdv2012.0.i586.rpm" >> /etc/bahmni-installer/setup.yml

# The above setup.yml, has a timezone entry. You can change it to suit your timezone if you like. For valid options
# please read this document: https://bahmni.atlassian.net/wiki/display/BAH/List+Of+Configurable+Installation+Variables

# Set the inventory file name to local in BAHMNI_INVENTORY environment variable. This way you won't need to use the '-i local' switch every time you use the 'bahmni' command
#You can also configure custom inventory file instead of local.
echo "export BAHMNI_INVENTORY=local" >> ~/.bashrc
source ~/.bashrc
 
# Now fire the installer
bahmni install 
 
# The installation should be done in about 15 - 30 minutes depending on your internet speed. 
# Verify installed components using the command:
yum list installed | grep bahmni

#Prerequisite for the fresh installation of Bahmni
yum upgrade python-setuptools

# Prerequisite Click 7.0 for fresh installation of Bahmni
# Download Click 7.0 to /home/bahmni
wget https://files.pythonhosted.org/packages/f8/5c/f60e9d8a1e77005f664b76ff8aeaee5bc05d0a91798afd7f53fc998dbc47/Click-7.0.tar.gz -P /home/bahmni
# Extract tar file
cd /home/bahmni
tar -xvf Click-7.0.tar.gz
# Install Click 7.0
cd Click-7.0
python setup.py install

# Install the bahmni command line program (Choose the version you want). 
yum install https://dl.bintray.com/bahmni/rpm/rpms/bahmni-installer-0.90-308.noarch.rpm  #version 0.90

# Confirm that the bahmni command is correctly installed (you should see a help message for the command)
bahmni --help
 
# Now setup a configuration file for bahmni command in /etc/bahmni-installer. 
curl -L https://goo.gl/R8ekg5 >> /etc/bahmni-installer/setup.yml
 
# Confirm the contents of the file. It should look like this file: (https://goo.gl/R8ekg5)
cat /etc/bahmni-installer/setup.yml

# Run below command to add mx_download_url to setup.yml file
printf "\nmx_download_url: https://dl.bintray.com/bahmni/rpm/mx-1.4.5-1-mdv2012.0.i586.rpm" >> /etc/bahmni-installer/setup.yml

# The above setup.yml, has a timezone entry. You can change it to suit your timezone if you like. For valid options
# please read this document: https://bahmni.atlassian.net/wiki/display/BAH/List+Of+Configurable+Installation+Variables

# Set the inventory file name to local in BAHMNI_INVENTORY environment variable. This way you won't need to use the '-i local' switch every time you use the 'bahmni' command
#You can also configure custom inventory file instead of local.
echo "export BAHMNI_INVENTORY=local" >> ~/.bashrc
source ~/.bashrc
 
# Now fire the installer
bahmni install 
 
# The installation should be done in about 15 - 30 minutes depending on your internet speed. 
# Verify installed components using the command:
yum list installed | grep bahmni

# Install the bahmni command line program (Choose the version you want). 
yum install https://dl.bintray.com/bahmni/rpm/rpms/bahmni-installer-0.87-81.noarch.rpm  #version 0.87

# Confirm that the bahmni command is correctly installed (you should see a help message for the command)
bahmni --help
 
# Now setup a configuration file for bahmni command in /etc/bahmni-installer. 
curl -L https://goo.gl/R8ekg5 >> /etc/bahmni-installer/setup.yml
 
# Confirm the contents of the file. It should look like this file: (https://goo.gl/R8ekg5)
cat /etc/bahmni-installer/setup.yml
 
# The above setup.yml, has a timezone entry. You can change it to suit your timezone if you like. For valid options
# please read this document: https://bahmni.atlassian.net/wiki/display/BAH/List+Of+Configurable+Installation+Variables
 
# Now fire the installer
bahmni -i local install #instead of local you can use your custom inventory file
 
# The installation should be done in about 15 - 30 minutes depending on your internet speed. 
# Verify installed components using the command:
yum list installed | grep bahmni
 

Steps to Upgrade Bahmni to 0.92 Version

Since Bahmni 0.92 is targeted for CentOS 7.6, you can not just overwrite the previous version which would be running on CentOS 6.x. You would need to provision a new machine with CentOS 7.6 first. However, you can restore your databases, images, docs as before.  

org/releases/mx-1.4.5-1-mdv2012.0.i586.rpm" >> /etc/bahmni-installer/setup.yml

# The above setup.yml, has a timezone entry. You can change it to suit your timezone if you like. For valid options
# please read this document: https://bahmni.atlassian.net/wiki/display/BAH/List+Of+Configurable+Installation+Variables

# Set the inventory file name to local in BAHMNI_INVENTORY environment variable. This way you won't need to use the '-i local' switch every time you use the 'bahmni' command
#You can also configure custom inventory file instead of local.
echo "export BAHMNI_INVENTORY=local" >> ~/.bashrc
source ~/.bashrc
 
# Now fire the installer
bahmni install 
 
# The installation should be done in about 15 - 30 minutes depending on your internet speed. 
# Verify installed components using the command:
yum list installed | grep bahmni

# Prerequisite for the fresh installation of Bahmni
yum upgrade python-setuptools

# Install the bahmni command line program. 
yum install https://repo.mybahmni.org/releases/bahmni-installer-0.89-193.noarch.rpm  #version 0.89

# Confirm that the bahmni command is correctly installed (you should see a help message for the command)
bahmni --help
 
# Now setup a configuration file for bahmni command in /etc/bahmni-installer. 
curl -L http://tiny.cc/defaultsetup >> /etc/bahmni-installer/setup.yml
 
# Confirm the contents of the file. It should look like this file: ( http://tiny.cc/defaultsetup )
cat /etc/bahmni-installer/setup.yml
 
# The above setup.yml, has a timezone entry. You can change it to suit your timezone if you like. For valid options
# please read this document: https://bahmni.atlassian.net/wiki/display/BAH/List+Of+Configurable+Installation+Variables

# Set the inventory file name to local in BAHMNI_INVENTORY environment variable. This way you won't need to use the '-i local' switch every time you use the 'bahmni' command
#You can also configure custom inventory file instead of local.
echo "export BAHMNI_INVENTORY=local" >> ~/.bashrc
source ~/.bashrc
 
# Now fire the installer
bahmni install 
 
# The installation should be done in about 15 - 30 minutes depending on your internet speed. 
# Verify installed components using the command:
yum list installed | grep bahmni
 

# command to list all services
sudo service --status-all
 
# command to list all configured services
chkconfig --list
 
# Command to start or stop a service is: service <service-name> start | stop | status | restart
# -----------------------------------------------------------------------------------------------
 
# Check status of Apache httpd service (runs Bahmni EMR UI)
sudo service httpd status
 
# Check status of OpenMRS Backend (needed for Bahmni EMR UI to talk to OpenMRS)
sudo service openmrs status
 
# Check status of Reports (needed to see reports inside EMR UI)
sudo service bahmni-reports status
 
# Check status of OpenELIS / Bahmni-Lab
sudo service bahmni-lab status
 
# Check status of Odoo (For Bahmni version 0.92 and above)
sudo service odoo status

# Check status of OpenERP (For Bahmni version 0.91 and earlier) 
sudo service openerp status
 
# Check status of Bahmni and ERP Connector (for data sync between systems)
sudo service bahmni-erp-connect status

# Check the status of atomfeed-console Service (Looking at the failed events and retrying failed events)
sudo service atomfeed-console status
 
# Databases needed to be running (mysqld for Bahmni EMR / OpenMRS, and Postgres for Lab and ERP)
sudo service mysqld status

# Check status of postgres (For Bahmni version 0.92 and above) 
sudo service postgresql-9.6 status  

# Check status of postgres (For Bahmni version 0.91 and earlier) 
sudo service postgresql-9.2 status

# Start all services
sudo service mysqld start
sudo service postgresql-9.6 start 
sudo service openmrs start
sudo service httpd start
sudo service bahmni-reports start
sudo service bahmni-lab start
sudo service odoo start
sudo service bahmni-erp-connect start
sudo service atomfeed-console start
sudo service pacs-integration start

Read this for Starting and Stopping all the Bahmni related services using the bahmni command.

# All applications are installed in /opt
cd /opt
 
# Location for Bahmni EMR UI and config (app deployed in Apache httpd server)
cd /var/www
 
# Location for OpenMRS (contains embedded tomcat)
cd /opt/openmrs
 
# Location for OpenMRS modules
cd /opt/openmrs/modules
  
# Location for Bahmni lab / OpenELIS (contains embedded tomcat)
cd /opt/bahmni-lab
 
# Location for Bahmni ERP / OpenERP
cd /opt/bahmni-erp
 
# Location for Bahmni reports (accessed from EMR UI Reports Button on Home Screen)
cd /opt/bahmni-reports
  
# Location for Bahmni pacs-integration service
cd /opt/pacs-integration

# Most Bahmni related Log files are located in /var/log in respective sub-folders bahmni-lab, openmrs, etc. 
# These are all soft links into /opt/app-name/log folder.
cd /var/log
 
# Client side logs (javascript errors) -- uses StackTrace.js library
cd /var/log/client-side-logs

# pgsql logs (Bahmni 0.92 and above)
cd /var/lib/pgsql/9.6/data/pg_log/

# pgsql logs (Bahmni 0.91 and earlier)
cd /var/lib/pgsql/9.2/data/pg_log/

# mySQL log file /var/log/mysqld.log

# DCM4CHEE log file /var/lib/bahmni/dcm4chee-2.18.1-psql/server/default/log/server.log

yum list installed | grep bahmni

It is very important to take your server security seriously. Please ensure you setup adequate security controls for your Bahmni server, including firewalls, strong passwords, key based ssh access, https certificates, etc.

# Install the bahmni command line program
yum update https://dl.bintray.com/bahmni/rpm/rpms/bahmni-installer-0.91-89.noarch.rpm  #version 0.91

# Confirm that the bahmni command is correctly installed (you should see a help message for the command)
bahmni --help
 
# Now fire the installer
bahmni -i local install 
 
# The installation should be done in about 15 - 30 minutes depending on your internet speed. 
# Verify installed components using the command:
yum list installed | grep bahmni

If you wish to install Bahmni on a machine that does NOT have internet access, then you will need to download all the necessary RPMs first, and make them available to the offline machine. Please read this discussion for understanding how can this be done: (OpenMRS Talk) Installing Bahmni with Limited Internet