...

...

Cost Estimation

Comprehensive approximate estimates are found in this document

...

Clinic setup - 2 frontdesk users, 2 doctors (4 users)*

Smaller clinic setup - 1 frontdesk user, 1 doctor (2 users)*

Cost Estimation Sheet with Results

Comprehensive test results and calculation estimates can be viewed in this google sheet document: Bahmni Lite Setup and Cost Estimation

The following below analysis explains the various design factors that were taken into consideration during the estimation performance test calculation process.

...

Smaller cluster (approx 40 concurrent users)

Report

https://bahmni.github.io/performance-test/longduration_report-20230130141239257_40users_24hrs_all_omods_afterhipfix/index.html

Pre Patient Records in DB - (prior to running the test): 75000

The given hardware supported 40 concurrent users during our test with acceptable performance. The clinical activities performed under the test were

...

Based on the above numbers , two default provisions to setup the cluster

...

& hardware, we recommend the following:

1. If the expected patient

...

maximum - If the expected patient demand forecast matches the tested numbers by less than 75%, consider this setup

4 users clinic setup (suggested)

• 1 to 10 clinics

4 users clinic setup (maximum)

• 1 to 12 clinics

2 users clinic setup (suggested)

• 1 to 20 clinics

2 users clinic setup (maximum*)

• 1 to 24 clinics

Cost Estimation

Comprehensive approximate estimates are found in this document

Bahmni Lite Setup and Cost Estimation

...

1. / traffic load matches the test data then, on the same hardware you can run up to 20 clinics (2 users per clinic) or 10 clinics (4 users per clinic).

2. If the expected patient / traffic load is LESS than 75% of the above test, then you can likely run up to 24+ clinics (with 2 users-per-clinic) or 12+ clinics (4 users per clinic).

Larger cluster (approx 70 concurrent users)

Report

https://bahmni.github.io/performance-test/longduration_report-20230213133118638_70users_24hours_AfterHIPfix_m5xlarge/index.html

Pre Patient Records in DB - prior to running the tests: 90000

The given hardware supported 70 concurrent users during our test with acceptable performance. The clinical activities performed under the test were

...

Based on the above numbers , two default provisions to setup the cluster

...

& hardware, we recommend the following:

1. If the expected patient

...

maximum - If the expected patient demand forecast matches the tested numbers by less than 75%, consider this setup

4 users clinic setup (suggested)

• 13 to 17 clinics

4 users clinic setup (maximum)

• 13 to 20 clinics

2 users clinic setup (suggested)

• 25 to 35 clinics

2 users clinic setup (maximum*)

• 25 to 40 clinics

Cost Estimation

Comprehensive approximate estimates are found in this document

Bahmni Lite Setup and Cost Estimation

...

1. / traffic load matches the test data then, on the same hardware you can run up to 35 clinics (2 users per clinic) or 17 clinics (4 users per clinic).

2. If the expected patient / traffic load is LESS than 75% of the above test, then you can likely run up to 40+ clinics (2 users-per-clinic) or 20 clinics (4 users per clinic).

^{NOTE: The number of users assumed are based on the number of requests sent by a user on an average to the server and typical clinic setup observed from real time sources.}

100+ Concurrent Users Long Duration Test Data

For detailed Test results and more scenarios please see this wiki page: Bahmni Lite Performance Long Duration Simulation Baselining