In Bahmni, patient identifiers are configurable. The default patient identifier prefix can be configured on the Registration page.
Steps
1. Add or Edit a Patient Identifier
To add a new patient identifier or edit an existing one, please refer to this document: Patient Identifier
2. Display the Default Identifier Prefix for Primary Identifier Type
On the Patient Registration page if you want to display a default identifier prefix for primary identifier type , please add the following configuration under config section in the registration/app.json file.
"defaultIdentifierPrefix”:source name of identifier/prefix
Example:
“config”:{
"defaultIdentifierPrefix”:”GAN”
}
If the default identifier prefix is not provided, or if it is empty or invalid, Bahmni will pick the first patient identifier prefix after sorting the available identifier prefixes in alphabetical order, as the default identifier prefix.
Note: this configurations works only for the primary identifier type, not for the extra identifier types.